[PATCH] powerpc: Fix MPIC sense codes in doc

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

[PATCH] powerpc: Fix MPIC sense codes in doc

Benjamin Herrenschmidt
The booting-without-of.txt had incorrect definition for the sense codes
for an OpenPIC controller

Signed-off-by: Benjamin Herrenschmidt <[hidden email]>

Index: linux-work/Documentation/powerpc/booting-without-of.txt
===================================================================
--- linux-work.orig/Documentation/powerpc/booting-without-of.txt 2006-08-30 08:51:19.000000000 +1000
+++ linux-work/Documentation/powerpc/booting-without-of.txt 2006-08-30 08:56:17.000000000 +1000
@@ -1136,10 +1136,10 @@
    Devices connected to openPIC-compatible controllers should encode
    sense and polarity as follows:
 
- 0 = high to low edge sensitive type enabled
+ 0 = low to high edge sensitive type enabled
  1 = active low level sensitive type enabled
- 2 = low to high edge sensitive type enabled
- 3 = active high level sensitive type enabled
+ 2 = active high level sensitive type enabled
+ 3 = high to low edge sensitive type enabled
 
    ISA PIC interrupt controllers should adhere to the ISA PIC
    encodings listed below:


_______________________________________________
Linuxppc-dev mailing list
[hidden email]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
Loading...